1Ohaus CorporationOhaus CorporationOhaus CorporationOhaus CorporationOhaus Corporation29 Hanover RoadFlorham Park, NJ07932-0900INSTRUCTION MANUALModel
102.7 Initial SetupFor first time setup, step through all menus and set the parameters as desired. As the last step, enter the CAL menuand calibrate
112.7 Initial Setup (Cont.)2.7.3 Load Cell Capacity InformationReview the specifications of the scale base to be used with the Indicator. Make sure t
122.7 Initial Setup (Cont.)2.7.4 Setup MenuThe CD-11 Indicator Setup Menu must be entered the first time the Indicator is used to set the scale base p
132.7 Initial Setup (Cont.)2.7.5 Readout MenuThe Readout menu is used to adapt the Indicator to environmental conditions, set measuring units on/off,
142.7 Initial Setup (Cont.)2.7.5 Readout Menu (Cont.)ProcedureSTABILITY (Cont.)• Press Zero/Menu button, StAb1 is displayed.Thestability range specifi
15AUTO POWER OFF• Press Zero/Menu button, AOtOFF is displayed. Thisis the Auto Off Timer. When set ON, the Indicator willshut off automatically after
162.7 Initial Scale Setup (Cont.)2.7.6 Print MenuThe Print menu provides data communication settings which can be entered. It contains 6 submenus: Re
172.7 Initial Scale Setup (Cont.)2.7.7 Lockout Switch MenuLockout Switch menu (LOCSW) is a software controlled option which can lock the settings in t
18CD-11 Indicators are equipped with a standard IBMTMcompatible, bi-directional RS232 interface for communi-cation with printers and computers. When t
193. CALIBRATION AND SEALINGModel CD-11 Indicator requires span calibration before using. Span calibration ensures that the Indicator readscorrectly
2IEC1010-1 & EN60950:1992 Safety RegulationsIEC1010-1 & EN60950:1992 SicherheitsbestimmungenIEC1010-1 & EN60950:1992 Consignes de sécurité
203.1 Legal for Trade (LFT) Operation and LFT SealingLegal for Trade (LFT) operation is possible through a software controlled LOCSW menu which can b
214. OPERATIONBefore using the Indicator, make sure it has been properly set up and calibrated. Refer to Sections 2 and 3 andreview settings. Four b
224. OPERATION (Cont.)4.6 Clear Tare OperationTo clear the tared weight stored in memory, proceed asfollows:• With no load on the scale base, press an
234. OPERATION (Cont.)4.7 Unit Switch Operation (Cont.)If enabled in program mode, additional units of measure may be utilized beyond the primary unit
244. OPERATION (Cont.)4.9 Establishing a New AveragePiece Weight (APW) (Cont.)• Press Zero/Menu button to accept current sample.The new APW is establi
254.13 Printing DataPrinting data to an external computer or printer requires that the communications parameters in the Print menu, beset first. Ref
265 CARE AND MAINTENANCETo keep the Indicator operating properly, the housing should be kept clean and free from foreign material. If neces-sary, a cl
275.2 Error Codes ListThe following list describes the various error codes and which can appear on the display and the suggested remedy.LoBat Is indic
28Capacity (lb or kg) 5 to 20,000*Graduation (readability) lb or kg 0.001 to 5*Displayed Resolution 1:5000 LFT or 1: 20,000 Non LFT*Weighing mode
29LIMITED WARRANTYOhaus products are warranted against defects in materials and workmanship from the date ofdelivery through the duration of the warra
3NOTE: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITALDEVICE, PURSUANT TO PART 15 OF THE FCC RULES.THESE LIM
30Ohaus Corporation29 Hanover Road,Florham Park, NJ 07932, USATel: (973) 377-9000,Fax: (973) 593-0359With offices worldwide.P/N 80'250' 638
4TABLE OF CONTENTSOVERVIEW OF CONTROLS AND INDICATOR FUNCTIONS ... 61. GETTI
5TABLE OF CONTENTS (Cont.)4.6 Clear Tare Operation ...
6OVERVIEW OF CONTROLS AND INDICATOR FUNCTIONS No. Designation Function 1 Display LCD display, indicates weight, modes and setup information.
72. INSTALLATION2.1 Unpacking and CheckingOpen the package and remove the instrument and the accessories. Check the completeness of the delivery. Th
82.2 Selecting the LocationThe Indicator should be used in an environment which is free from corrosives, vibration, temperature or humidityextremes. T
92.5 Connecting PowerThe CD-11 Indicator may be operated using the AC Adapter supplied, or 6 Alkaline C-type batteries (not supplied).2.5.1 AC Adapter
Comments to this Manuals