Ohaus CD-33 Indicator User Manual Page 1

1CD IndicatorsINSTRUCTION MANUALModels CD-31 and CD-33 IndicatorsOhaus CorporationOhaus CorporationOhaus CorporationOhaus CorporationOhaus Corporation

10CD Indicators• Plug the AC adapter to an appropriate power supply. Power is now applied to the Indicator.• The Indicator performs a self-test. This

11CD IndicatorsThe indicator itself has three basic menus; each is selected by front panel buttons marked Mode, Units and Setup.Mode ButtonThe Mode bu

12CD Indicators RS232Baud 300, 600, 1200, 2400, 4800,9600Parity None, -E-, -Odd-, -0-, -1-Data 7 or 8Stop 1 or 2Lock ON/OFFExit

13CD Indicators2.6 Scale Base Setup (Cont.)Review the specifications of the scale base to be used with the Indicator. Make sure the settings you sele

14CD Indicators• Press Enter button, LOCK OFF is displayed, selecteither ON or OFF using or buttons, thenpress Enter button SAVED is momentarily

15CD Indicators3. SETTING UP YOUR INDICATOR3.1 Setting Date and TimeYour Indicator provides date and time data which can be viewed on a computer or pr

16CD Indicators3.2ReadoutThe Readout menu is used to adapt the Indicator to environmental conditions. It contains five submenus: Stable,Auto 0, Filte

17CD IndicatorsProcedure• Press the Setup button, SCALE is displayed.• Press button until READOUT is displayed.• Press Enter button, STABLE is displ

18CD Indicators3.3 Good Manufacturing Practices (GMP) DataThe GMP Data submenu enables the storage of a user identification number (7 digits), a proje

19CD IndicatorsProcedureTo select any of the items in the GMP Set menu, proceedas follows:3.4Good Manufacturing Practices (GMP) SetGood Manufacturing

2CD IndicatorsIEC1010-1 & EN60950:1992 Safety RegulationsIEC1010-1 & EN60950:1992 SicherheitsbestimmungenIEC1010-1 & EN60950:1992 Consigne

20CD Indicators3.5PrintThe Print menu provides a number of options which can be turned ON or OFF. It contains 8 submenus: Auto Print,Inter, Stable, Nu

21CD Indicators3.6 RS232The RS232 menu provides communication parameters which can be set to accommodate external printers or comput-ers. It contains

22CD Indicators3.7 Legal for Trade (LFT)Legal for Trade (LFT) is a software controlled option which can be set to LFT LOCK. When LFT LOCK is set ON

23CD Indicators3.8 ModeThe Mode submenu permits the selection of 6 modes which can be turned ON or OFF. These modes are: Weigh,Percent, Count, Animal

24CD Indicators3.9 UnitsThe Units submenu permits the selection of the measuring units which can be turned ON or OFF and locked.Procedure• Press the S

25CD IndicatorsLFT is OffMode MenuWEIGH= OnPERCENT= OnCOUNT= OnANIMAL= OnCHECKWEIGH = OnEXP WGT= OffLock Switch is OffMenu LocksRS232= OffREADOUT=

26CD Indicators3.11 Custom UnitCustom Unit is enabled when Custom Unit Setup under Units Menu is turned ON. This feature can be used to createyour ow

27CD Indicators3.11 Custom Unit (Cont.)Procedure (Cont.)• Press Enter button, SAVED is momementary dis-played followed by LSD. There are 6 LSD (least

28CD Indicators4.1 CalibrationModel CD-31 and CD-33 Indicators offer a choice of four calibration methods: Span, User, Linearity, and CalTestTM.•Span

29CD Indicators4.1.1 Span CalibrationSpan calibration requires a mass equal to 100% of the scale base capacity.Procedure• Press the Setup button, SCAL

3CD IndicatorsNOTE: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITALDEVICE, PURSUANT TO PART 15 OF THE FCC RU

30CD Indicators4.1.2 User CalibrationUser calibration is used when it is desired to calibrate the Indicator using a mass of known value from 10% to 10

31CD IndicatorsProcedure• Press the Setup button, SCALE is displayed.• Press button UNTIL CAL is displayed.• Press Enter button, CAL TYPE is display

32CD Indicators4.1.4 Calibration TestCalibration test feature allows a check of a known calibration mass against the last stored calibration informati

33CD Indicators4.1.5 Calibration GMP PrintoutIf any option in the GMP Set Menu is turned On, GMP automatically prints data after calibration is comple

34CD Indicators4.2 WeighingThe Indicator is shipped with kilograms only enabled. When the Indicator is to be used with other Type Approved/Legalfor T

35CD Indicators4.2.2 Preset TaringPreset taring is used to enter a tared weight via the numerical keypad. If a container's weight is known, the

36CD Indicators4.3 Percent WeighingPercent Weighing is enabled only when Percent is turned ON in the Mode submenu under Setup. Percent weighingpermit

37CD Indicators4.4Parts CountingParts Counting is enabled only when Count is turned ON in the Mode submenu under Setup and selected with theMode butt

38CD IndicatorsProcedure• Press the Mode button, WEIGH is displayed.• Press or button until ANIMAL is displayed.• Press Enter button to continue,

39CD IndicatorsProcedure• Press the Mode button, WEIGH is displayed.• Press or button until CHECK W is dis-played.• Press Enter button to continu

4CD IndicatorsTABLE OF CONTENTSOVERVIEW OF CONTROLS ...

40CD Indicators4.7 Printing DataPrinting data to an external computer or printer requires that the communications parameters in the Setup menu, Print

41CD IndicatorsCommandCommandCommandCommandCommandCharacterCharacterCharacterCharacterCharacterDescriptionDescriptionDescriptionDescriptionDescription

42CD IndicatorsCommandCommandCommandCommandCommandCharacterCharacterCharacterCharacterCharacterDescriptionDescriptionDescriptionDescriptionDescription

43CD Indicators5 CARE AND MAINTENANCETo keep the Indicator operating properly, it should be kept clean and free from foreign material. If necessary, a

44CD Indicators5.2 Error Codes ListError Codes ListThe following list describes the various error codes and which can appear on the display and the su

45CD Indicators5.5 AccessoriesDescription Ohaus Part No.Adjustable Column 80250632Wall Mounting Bracket 80250633Scale Base Mounting Plate 80250634RS23

46CD IndicatorsLIMITED WARRANTYOhaus products are warranted against defects in materials and workmanship from the date of deliv-ery through the durati

47CD IndicatorsOhaus Corporation29 Hanover Road,Florham Park, NJ 07932, USATel: (973) 377-9000,Fax: (973) 593-0359With offices worldwide.P/N 80'

5CD IndicatorsTABLE OF CONTENTS (Cont.)4. OPERATING YOUR INDICATOR ...

6CD IndicatorsOVERVIEW OF CONTROLS 3 4 256 8910 711 No. Designation Function 1 Mode button Selects standard weighing, percent, parts counting,

7CD IndicatorsOVERVIEW OF DISPLAY INDICATORS No. Function123456789101112131415161718 No. Function 1 Use (Pointer Group) keys to change -

8CD Indicators2. INSTALLATION2.1Unpacking and CheckingOpen the package and remove the instrument and the accessories. Check the completeness of the d

9CD Indicators2.3 Connecting the Indicator to aScale Base• Turn the Indicator over.NOTE:Check the wiring instructions of your scale base.• The Termina