Ohaus I150-S Indicator User Manual download pdf (Page 31)

31

Average Display CycleAverage Display Cycle

Average Display CycleAverage Display Cycle

Average Display Cycle

Average display cycle is used for animal

weighing where the movement of animal

subjects on the load receiver causes in-

stability and inaccurate weight measure-

ments. Using this feature, you can enter

a number of sample readings (from 1 to

255) which the indicator will average be-

fore displaying a weight measurement.

Entering 1 for this parameter disables the

feature.

Enter the number of readings to be

averaged using the numeric keypad,

then press

ENTER to return to scale

submenu.

Refer to “Animal Weighing” in the OP-

ERATION section for the animal weighing

procedure.

LFT NOTE:LFT NOTE:

LFT NOTE:LFT NOTE:

LFT NOTE: Does not appear on menu

when LFT is set to ON.

Parts Count Error LevelParts Count Error Level

Parts Count Error LevelParts Count Error Level

Parts Count Error Level

The parts counting function of the I150

assumes that all parts are of a reasonably

uniform weight. Since there is usually

some difference, an allowable percent-

age of error can be entered. The error is

a percentage of the sample part(s) weight.

Acceptable entries can be from:

50

__________% to 100%

resolution

To enter a parts counting error level:

Enter the desired error using the

numeric keypad,

then press

ENTER to return to scale

submenu

LFT NOTE:LFT NOTE:

LFT NOTE:LFT NOTE:

LFT NOTE: Does not appear on menu

when LFT is set to ON.

ENTERENTER

ENTERENTER

ENTER

ENTERENTER

ENTERENTER

ENTER

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 75 76

Comments to this Manuals

No comments