Ohaus I150-S Indicator User Manual download pdf (Page 49)

WeighingWeighing

Weighing

1. Select the desired weighing unit .

2. If necessary, press ZERO to obtain a

zero reading on the display.

3. Place the object(s) to be weighed on

the load receiver.

4. Wait for the stability indicator to ap-

pear before reading the weight.

LFT NOTE:LFT NOTE:

LFT NOTE: Stability indicator does not

appear when LFT is set to ON.

TaringTaring

Taring

When weighing material or objects that

must be held in a container, taring en-

ables the indicator to save the container

weight in memory, separate from the

weight of the material in the container.

The I150 permits you to set tare values in

two ways as explained in the following

examples.

Example 1: Unknown Tare WeightExample 1: Unknown Tare Weight

Example 1: Unknown Tare Weight

1. Place an empty container on the load

receiver, and read its weight on the

display. Notice that the GROSS indi-

cator is ON.

2. Press TARE.

Stability

Indicator

Example

When the display becomes stable, it

will show zero and the NET indicator

will be ON. The container’s weight is

stored in memory.

3. Add the material to be weighed to the

container. As material is added its

net weight will be displayed.

ONON

ZEROZERO

ZERO

TARETARE

TARE

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 75 76

Comments to this Manuals

No comments

Ohaus I150-S Indicator User Manual Page 49

Comments to this Manuals

Related products and manuals for Scales Ohaus I150-S Indicator