Ohaus I150-S Indicator User Manual download pdf (Page 61)

61

Animal WeighingAnimal Weighing

Animal WeighingAnimal Weighing

Animal Weighing

Before beginning this procedure, make

sure the number of sample readings to be

averaged has been entered for the “Ad”

parameter in the scale submenu.

1. Press

FNCT, then 3KEY to access

the animal weighing mode.

“Ad” will be displayed indicating the

I150 is in the animal weighing mode.

2. Place the subject on the load re-

ceiver.

3. Press ENTER to begin averaging.

4. The display will quickly count down

the number of readings being taken.

When the required number of read-

ings has been taken, the display will

show the average weight.

5. The weight remains on the display

until you:

• press ENTR to repeat the proce-

dure, or

• press CLR to exit animal weighing.

When you exit animal weighing, the I150

returns to normal weighing operations

and displays the current load on the re-

ceiver.

Using ID CodesUsing ID Codes

Using ID CodesUsing ID Codes

Using ID Codes

The I150 allows you to store data using

ten ID codes, up to six digits in length. An

ID code may represent a particular prod-

uct, a package, or a part for example. The

codes are stored along with one of three

values; a tare weight, an average piece

weight, or an in-out weight (see “StorE” in

the “SCALE SUBMENU” section). The

following procedures explain how to use

ID codes.

FUNCTIONFUNCTION

FUNCTIONFUNCTION

FUNCTION

33

33

3

ENTERENTER

ENTERENTER

ENTER

ENTERENTER

ENTERENTER

ENTER

- / +- / +

- / +- / +

- / +

CLRCLR

CLRCLR

CLR

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 75 76

Comments to this Manuals

No comments