Ohaus I150-S Indicator User Manual download pdf (Page 28)

28

Auto-Zero TrackingAuto-Zero Tracking

Auto-Zero TrackingAuto-Zero Tracking

Auto-Zero Tracking

Auto-Zero tracking minimizes the effects

of temperature changes and shift on the

zero reading. Using this parameter, you

select a threshold level (in graduations),

which the I150 will consider to be a valid

change in load. Selections are .5, 1, and

3 graduations. OFF disables the feature.

To select a value or disable the feature:

Press UPUP or DOWN to display the

desired selection, then press ENTER

to return to the scale submenu.

LFT NOTE:LFT NOTE:

LFT NOTE:LFT NOTE:

LFT NOTE: Initially set to .5 when LFT is

set to ON. May be changed to 1 or 3 for

special applications: Normally set to .5 for

bench and counter scales; 3 for vehicle

scales; 1 for other scales.

Custom Unit ConversionCustom Unit Conversion

Custom Unit ConversionCustom Unit Conversion

Custom Unit Conversion

FactorFactor

FactorFactor

Factor

If you need to display weight measure-

ments in a unit other than LB, KG or OZ,

this feature enables you to create your

own unit of measure. You enter a conver-

sion factor which the indicator will use to

convert the calibration unit to the desired

unit of measure. There are two examples

at the end of this section which illustrate

how to determine conversion factors.

Once your conversion factor is deter-

mined, use the following procedure to

enter it.

LFT NOTE:LFT NOTE:

LFT NOTE:LFT NOTE:

LFT NOTE: Not available when LFT is set

to ON.

ENTERENTER

ENTERENTER

ENTER

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 75 76

Comments to this Manuals

No comments